get_clock_domain_info (::quartus::sta)

The following table displays information for the get_clock_domain_info Tcl command:

Tcl Package and Version

Belongs to ::quartus::sta 1.0

Syntax get_clock_domain_info [-h | -help] [-long_help] [-hold] [-mpw] [-recovery] [-removal] [-setup]
Arguments -h | -help Short help
-long_help Long help with examples and possible return values
-hold Hold Analysis
-mpw Minimum Pulse Width Analysis
-recovery Recovery Analysis
-removal Removal Analysis
-setup Setup Analysis (Default)
Similar to create_timing_summary, the
get_clock_domain_info command returns a Tcl list of
information about each active clock domain.  Each entry in
the list is a list of four elements: the clock name,
worst-case slack, endpoint TNS, and edge TNS. TNS
istotal negative slack, and it is the sum of
all slacks less than zero for either destination
registers or ports in the clock domain (endpoint TNS)
or for all edges affecting the clock domain (edge

By default, this command creates a Setup Summary. This
command can also generate a Hold Summary (-hold),
Recovery Summary (-recovery), Removal Summary
(-removal), or Minimum Pulse Width Summary (-mpw).
Example Usage
project_open my_project

# Always create the netlist first
read_sdc my_project.sdc

# Get domain summary object
set domain_list [get_clock_domain_info -setup]
foreach domain $domain_list {
	set name [lindex $domain 0]
	set slack [lindex $domain 1]
	set keeper_tns [lindex $domain 2]
	set edge_tns [lindex $domain 3]

	puts "Clock $name : Slack = $slack , TNS = ( $keeper_tns , $edge_tns )"

# The following command is optional

Return Value Code Name Code String Return
TCL_OK 0 INFO: Operation successful
TCL_ERROR 1 ERROR: Timing netlist does not exist. Use create_timing_netlist to create a timing netlist.