Add Hardware Dialog Box
Allows you to add new programming hardware, such as an EthernetBlaster cable, and configure settings so that the Quartus® Prime software recognizes the added hardware. Refer to the Intel FPGA Software Installation and Licensing manual for more information on setting up hardware during the Quartus® Prime installation, such as installing device drivers.
You can also specify the hardware type and its port and baud rate settings, or server name and server password settings, if applicable. The Quartus® Prime software automatically detects and adds USB devices to the Hardware list in the Hardware Setup dialog box when you plug them into a USB port on your computer, and, as a result, they do not appear in the Add Hardware dialog box.
Specifies the current programming hardware, which can be the EthernetBlaster, ByteBlasterMV, or ByteBlasterII download cable.
Specifies the port to which the programming hardware selected in the Hardware Type list is attached.
Specifies the name of the server you want to use to transfer programming data to a device via the EthernetBlaster cable.
Displays the TCP port used when connecting to the server you want to use to transfer programming data to a device via the EthernetBlaster cable.
Specifies the password for the server you want to use to transfer programming data to a device via the EthernetBlaster cable.
Detects servers with EthernetBlaster cables that are available on the local subnet of a network. Available servers are listed in the Server name list.